How to Calculate Half Life
How to calculate half life: count how many times the amount halved, then divide the time by that count.
Paste this code into your page. It shows the half life calculator with one plain credit link.
Learn
The three steps in short
You need three numbers: the amount at the start, the amount left, and the time between them. The amounts can be grams, milligrams, a percent or an activity in becquerels. They just have to use the same unit.
Step by step: from two amounts
- Divide the start by what is left. This is the ratio, N0 ÷ N.
- Find how many halvings that is. Take log2 of the ratio. On most calculators: ln(ratio) ÷ ln(2).
- Divide the time by the number of halvings. That is T = t ÷ log2(N0 ÷ N).
Example: a sample falls from 120 g to 15 g in 21 days.
- 120 ÷ 15 = 8.
- log2(8) = 3, since 2 × 2 × 2 = 8. It halved 3 times.
- 21 days ÷ 3 = 7 days. So T is 7 days.
Check it: 120 → 60 → 30 → 15 takes 3 half-lives of 7 days, which is 21 days.
When it does not halve a whole number of times
Most real numbers do not work out to 2, 4 or 8. The steps stay the same.
Example: 100 g falls to 30 g in 10 hours.
- 100 ÷ 30 = 3.33333.
- ln(3.33333) ÷ ln(2) = 1.73697 halvings.
- 10 h ÷ 1.73697 = 5.75717 h.
So T is about 5.76 hours. Do not round too early. If you round the halvings to 1.7, you get 5.88 hours, which is off by about 2%.
How to find half-life from a graph
A decay graph has time along the bottom and the amount up the side.
- Read the amount at time zero.
- Find half of that amount on the side axis.
- Go across to the curve, then straight down. The time you land on is T.
- To check, find a quarter of the start. It should be at two half-lives.
You can start from any point, not just time zero. From any amount, the time to reach half of it is the same. That is what makes a half-life a steady number. IUPAC calls this kind of graph a decay curve. You can see one on the what is a half-life page.
Sources: IUPAC Gold Book, "decay curve", DOI 10.1351/goldbook.D01539; IUPAC Green Book, 3rd edition, page 24, DOI 10.1039/9781847557889.
How to find the amount left or the time
- Amount left: N = N0 × (1/2)^(t ÷ T). Count the half-lives, t ÷ T, then halve that many times.
- Time: t = T × log2(N0 ÷ N). Count the halvings, then multiply by T.
The half life formula page shows all four forms. The half life calculator does each one and shows every step, so you can check your own work line by line.
Half-life practice problems
Try each one, then open the answer below it.
- A 60 g sample halves every 3 days. How much is left after 9 days?
- A source drops from 48 Bq to 3 Bq in 20 minutes. What is T?
- Cesium-137 halves every 30.018 years. How much of 10 g is left after 100 years?
- A sample halves every 8 days. How long until 1,000 Bq falls to 125 Bq?
- After 4 half-lives, 5 g is left. How much was there at the start?
Answers
- 9 ÷ 3 = 3 half-lives, so 60 → 30 → 15 → 7.5 g.
- 48 ÷ 3 = 16, and log2(16) = 4 halvings. 20 ÷ 4 = 5 minutes.
- 100 ÷ 30.018 = 3.33133 half-lives. 10 × (1/2)^3.33133 = 0.993501 g.
- 1,000 ÷ 125 = 8, so 3 halvings. 3 × 8 = 24 days.
- Double 4 times: 5 × 16 = 80 g.
Common mistakes
- Dividing the amount by the time. Half-life is not a rate per hour. Use the ratio and log2.
- Mixing units. Put t and T in the same unit first.
- An amount left that is bigger than the start. That is growth, not decay. Check the numbers.
- Using the amount lost instead of the amount left. If 75% is gone, 25% is left, and that is 2 half-lives.
Questions
How do you find half-life from a graph?
Read the amount at the start. Find half of it on the side axis, go across to the curve, then down to the time axis. That time is one half-life. A quarter of the start should sit at two half-lives.
How do you find half-life with two points?
Divide the first amount by the second to get the ratio. Take log2 of the ratio to get the number of halvings. Divide the time between the two points by that number.
What are good half-life practice problems?
Mix the four types: amount left, time, T and starting amount. Start with whole halvings, like 48 to 3, then try ones that are not whole, like 100 to 30. The five problems on this page cover all four types.
How do you solve half-life problems?
Write down what you know: start, amount left, time and T. Put the times in one unit. Then use N = N0 × (1/2)^(t ÷ T), or a form of it solved for the letter you need.
Sources
4 sources with read dates
- "decay curve" in the IUPAC Gold Book, DOI 10.1351/goldbook.D01539: "A graph showing the relative amount of radioactive substance remaining after any time interval"; read from the Internet Archive copy of 11 May 2026, read 2026-10-06
- "half life" in the IUPAC Gold Book, DOI 10.1351/goldbook.H02717, read from the Internet Archive copy of 11 May 2026, read 2026-10-06
- IUPAC Green Book, 3rd ed., DOI 10.1039/9781847557889, page 24: N(t1/2) = N(0)/2, read 2026-10-06
- DDEP table for Cs-137, LNE-LNHB/CEA: half-life 30.018 (22) years, read 2026-10-06